Advertisement
Loader Calibration Screen
To access this screen, push button 6 on the
Selection Screen (page
This screen allows you to calibrate the loader cam or
to calibrate the loader arm.
This screen also allows you to adjust the cam-stop
positions, ensuring that the cam is in line with the
pipe row.
Push the following buttons to calibrate the loader cam
or loader arm:
•
Push button 1 to calibrate the loader cam
17)
•
Push button 2 to calibrate the loader arm
17)
Figure 17
Loader-calibration Screen
1. Calibrate loader cam
2. Calibrate loader arm
Main
5).
(Figure
(Figure
3. Return to the
Main-selection Screen
Loader Cam Calibration
Screen
To access this screen, push button 1 on the
Calibration Screen (page
This screen allows the user to set the row positions
for the pipe holder.
Push the following buttons to set the desired position:
•
Button 1—Set position 1
•
Button 2—Set position 2
•
Button 3—Set position 3
•
Button 4—Set position 4
To set the load or unload position, push button 5
(Figure
18).
g025090
Loader-cam-calibration Screen
1. Set position 1
2. Row selected check mark
3. Row number
The screen will display Calibration Complete, if the
calibration numbers are acceptable.
The screen will display Calibration Fail, if the
calibration numbers are not acceptable.
8
Loader
8).
(Figure
18)
(Figure
18)
(Figure
18)
(Figure
18)
Figure 18
4. Loader cam not set (X in
circle)
5. Set load/unload position
g029909
Advertisement
