Subscribe to Our Youtube Channel
Related Manuals for Black Box JPM083A-R3
Summary of Contents for Black Box JPM083A-R3
- Page 1 © Copyright 2004. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746...
- Page 2 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 SUPPORT Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 INFORMATION Web site: www.blackbox.com • E-mail: info@blackbox.com...
- Page 3 TRADEMARKS USED IN THIS MANUAL TRADEMARKS USED IN THIS MANUAL UL is a registered trademark of Underwriters Laboratories Incorporated. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
-
Page 4: Table Of Contents
WALLMOUNT CAT5E UNIVERSAL PATCH PANEL (12- OR 24-PORT) Contents Chapter Page 1. Specifications ............... 3 2. -
Page 5: Specifications
Plug Insertion Life (MTBF): 750 cycles minimum Temperature: Operating: -40 to +150°F (-40 to +68°C) Size: JPM083A-R3: 4.1"H x 17"W x 3.1"D (10.4 x 43.2 x 7.9 cm); JPM085A-R3: 8.1"H x 17"W x 3.1"D (20.6 x 43.2 x 7.9 cm) Weight: JPM083A-R3: 4 lb. -
Page 6: Introduction
WALLMOUNT CAT5E UNIVERSAL PATCH PANEL (12- OR 24-PORT) 2. Introduction 2.1 Overview The Wallmount CAT5e Universal Patch Panels are designed to link ports together in small- to medium-sized cross-connect applications where space is limited. For example, the patch panel is ideal for cluttered telecommunication closets where relay racks aren’t practical. - Page 7 CHAPTER 2: Introduction Cable tie buttons Keyhole mounting Large hooks for cable Large hooks for cable slot management management RJ-45 ports, labeled 1–12, are in the top Keyhole mounting row of this diagram. Color-coded slot sticker positions shown in Figure 4, Cable tie buttons labeled 1–12, are in the middle and bottom rows of this diagram.
-
Page 8: Installation
WALLMOUNT CAT5E UNIVERSAL PATCH PANEL (12- OR 24-PORT) 3. Installation 1. Make sure that the Wallmount CAT5e Universal Patch Panel is firmly secured to the wall. 2. Remove the IDC cover by sliding it to the right and then lifting it from the surface. 3. - Page 9 CHAPTER 3: Installation T568B (top row) T568B (top row) T568A (bottom row) T568A (bottom row) T568B (top row) T568B (top row) T568A (bottom row) T568A (bottom row) T568B (top row) T568B (top row) T568A (bottom row) T568A (bottom row) T568B (top row) T568B (top row) T568A (bottom row) T568A (bottom row)
- Page 10 WALLMOUNT CAT5E UNIVERSAL PATCH PANEL (12- OR 24-PORT) 5. Terminate each wire with a 110 punchdown tool. Then push the 110 tool to the edge of the connector in order to trim the conductors. See Figure 6. Figure 6. Using the punchdown tool to terminate connectors. 6.
Need help?
Do you have a question about the JPM083A-R3 and is the answer not in the manual?
Questions and answers