Black Box JPM624A Manual

Black Box JPM624A Manual

Cat6 patch panels

Advertisement

NOTE: For best performance, keep the untwisted part of the wire less than 0.5 inches (1.3 cm)
long.
Using a punchdown tool, terminate each wire. Push the 110 punchdown tool to the edge
of the 110 connector to trim the conductors. See Figure 3.
4. Optional: Place the stuffer caps on the terminated 110 blocks for added strain relief.
5. Finally, connect the patch cord. Plug the patch cord into the patch panel, then connect it
to the network equipment.
Installation is complete.
TRADEMARKS USED IN THIS MANUAL
Black Box and the Double Diamond logo are registered trademarks of BB Technologies,
Inc.
UL is a registered trademark of Underwriters Laboratories, Inc.
All other trademarks mentioned in this manual are acknowledged to be the property of the
trademark owners.
© Copyright 2008. Black Box Corporation. All rights reserved.
1000 Park Drive
Figure 3. Terminating the wire conductors.
Lawrence, PA 15055-1018
724-746-5500
Fax 724-746-0746

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JPM624A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Black Box JPM624A

  • Page 1 Installation is complete. TRADEMARKS USED IN THIS MANUAL Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. UL is a registered trademark of Underwriters Laboratories, Inc. All other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
  • Page 2 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) SUPPORT FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com...
  • Page 3: Specifications

    • (1) bag of stuffer caps • This user's manual If anything is missing or damaged, please contact Black Box at 724-746-5500. You will also need a punchdown tool to terminate the horizontal cable to the patch panel. The punchdown tool is not included with your patch panel.
  • Page 4 Storage temperature range: -40 to +154˚F (-40 to 68˚C) Humidity: 10% – 90%, relative Size: JPM624A: 1.75"H (1U) x 19"W x 1.4"D (4.4 x 48.3 x 3.6 cm); JPM648A: 3.5"H (2U) x 19"W x 1.4"D (8.9 x 48.3 x 3.6 cm) Weight: JPM624A: 1.4 lb.

This manual is also suitable for:

Jpm648a

Table of Contents