Advertisement
Available languages
Available languages
Scope of supply
1x rear bag
1x rear bag carrier, left
1x rear bag carrier, right
4x screw M8x30
4x washer
When the rear bags are mounted, especially when they are
loaded, greater side wind susceptibility may cause a change in
vehicle handling characteristics while riding, taking curves, and
braking. Exercise caution in high winds.
Due to the changes in vehicle handling characteristics, acceler-
ate gradually to the permitted maximum speed of 130 km/h.
Ensure that the load never exceeds 3 kg.
The rear bag must always be closed while riding. A rear bag
that has any form of damage may not be used.
Make sure that all the baggage and accessories are properly
fastened. Check this regularly!
Mounting the carriers
- Remove screws
with bushings.
- Remove cover of the passenger handle on the left
- Position left carrier
(included).
- Mount screws
with washers
- Position right carrier
(included).
- Mount screws
with washers
Mounting the rear bag
- Turn over the opening of rear bag
with strap
.
- Tighten strap
.
- Close fastener
on both sides.
and right
(all included) and tighten to 25 Nm.
(all included) and tighten to 25 Nm.
(included) 3 times and close
.
5
Advertisement
