Setting The First Remote Control; Automatic Disabling Of The First Remote Control Setting Function - CHERUBINI Wave RX Instructions Manual

SETTING THE FIRST REMOTE CONTROL

This operation can only be performed when the motor is new, or after a total delete of
the memory.
During this step, power up only one motor at time!
T1: First remote control to be set
+
A B
T1
AUTOMATIC DISABLING OF THE FIRST
REMOTE CONTROL SETTING FUNCTION
Every time you connect the power supply to the motor, you have 3 hours to store the
first remote control. After this time, the ability to store the remote control is disabled.
To reset the timer of the function you have to disconnect and reconnect the power
supply to the motor.
B
T1
30
B
T1 (2 sec)