Page 1
Plug&Play MOTORE TUBOLARE CON REGOLAZIONE AUTOMATICA DEL FINECORSA ELETTRONICO TUBULAR MOTOR WITH AUTOMATIC ADJUSTMENT OF THE ELECTRONIC LIMIT SWITCH ROHRMOTOR MIT AUTOMATISCHER EINSTELLUNG DER ELEKTRONISCHEN ENDLAGEN MOTEUR TUBULAIRE AVEC RÉGLAGE AUTOMATIQUE DES FINS DE COURSE ÉLECTRONIQUES MOTOR TUBULAR CON REGULACIÓN AUTOMÁTICA DEL FIN DE CARRERA ELECTRONICO ISTRUZIONI - INSTRUCTIONS - EINSTELLANLEITUNGEN INSTRUCTIONS - INSTRUCCIONES...
Page 3
TRANSLATION OF THE ORIGINAL INSTRUCTIONS ELECTRICAL CONNECTIONS - To prevent any danger or malfunction, the size of electrical control components connected to the motor must be compatible with the electrical features of the motor. - Means for disconnection must be incorporated in the fixed wiring in accordance with the national installation standards.
Page 4
HOW TO PREPARE THE MOTOR STOP RING NUT ADAPTOR DRIVING PULLEY STOP RING NUT 1. Insert the adaptor in the stop ring nut mating the groove with the reference notch and push till they touch. 2. Fix the driving pulley on the motor pin until the stop pin clicks.
Page 5
When an obstacle is detected in one direction, the movement is inhibited in that direction. Please operate the motor in the opposite direction to restore normal operation. EU DECLARATION OF CONFORMITY CHERUBINI S.p.A. declares that the product is in conformity with the relevant Union harmonisation legislation: Directive 2014/35/EU - Directive 2014/30/EU - Directive 2011/65/EU The full text of the EU declaration of conformity is available upon request at the following website: www.cherubini.it.
Need help?
Do you have a question about the Plug&Play and is the answer not in the manual?
Questions and answers