Table of Contents
Advertisement
4.1 Main switch
WARNING:
instructions carefully before you start the
product.
WARNING:
away from the rotating blades. Do not put
your hands or feet near to or below the
product when the blade motor is on.
WARNING:
when persons, especially children, or
animals are in the work area.
•
Set the Main switch in the
product.
•
Set the Main switch in the
product is not in use or before you do inspection or
maintenance on the product.
4.2 Start
1.
Set the Main switch to position
2.
Open the Automower
®
Connect app.
Dashboard .
3.
Select the
Start in the Automower
4.
Select
If the product is parked in the charging station, it
will only leave the charging station when the
battery is fully charged and if the schedule is set to
allow the product to operate.
Note:
Make sure that the START button on top of the
product is in the correct position. The product does not
start if the STOP button is activated.
1457 - 005 - 16.10.2020
4 Operation
Read the safety
Keep your hands and feet
Do not use the product
1 position to start the
0 position when the
1 .
®
Connect app.
4.3 Operating mode - Start
Start has been selected the following operation
When
selections can be selected.
•
Main area
•
Override schedule
•
Secondary area
4.3.1 Main area
Main area is the standard work mode where the product
cuts grass and charges automatically.
®
1.
Open the Automower
Connect app.
Dashboard in the Main menu.
2.
Select
Start
3.
Select
4.
Select
Resume on main area to start the product.
4.3.2 Override schedule
Any schedule settings can be temporarily overridden by
Override schedule .
selecting
Dashboard in the Main menu.
1.
Select
2.
Select
Start .
3.
Slide the horizontal bar of
find a suitable override duration. It is possible to
override the schedule up to 7 days.
4.
Select a suitable override duration.
4.3.3 Secondary area
To mow secondary areas the operating mode
Secondary area must be selected. In this mode, the
operator must move the product manually between the
main area and the secondary area. The product mows
for a selected period of time or until the battery is empty.
When the battery is empty, the product stops and the
Needs manual charging shows in the product
message
display. Put the product in the charging station to charge
the battery. When the battery is charged, the product
Override schedule to
Operation - 31
Advertisement
Table of Contents
