Table of Contents
Advertisement
Note:
®
The Automower
Direct connection is only valid
as long as you are within Bluetooth
®
out of Bluetooth
range, you will loose the Automower
Direct connection and you must do the connection
process again.
3.10.6.1 To start to use Automower
1.
Download the Automower
mobile device.
®
2.
Select Automower
Direct on the start screen of
®
the Automower
Connect app.
®
3.
Start Bluetooth
on your mobile device and on the
To do the basic settings on page
product, refer to
22 .
4.
Select the product to pair with in the Automower
Connect app.
5.
Enter the PIN code for the product.
Note:
You have access to the menus and functions as
long as you are within Bluetooth
3.10.7 Map
The map shows the current position of the product and
the set centerpoint for GeoFence.
3.10.7.1 Map settings
Map in the main menu.
1.
Open
2.
Select the settings symbol.
3.
Enable or disable
Movement path .
GeoFence radius .
4.
Enable or disable
Map view or Satellite view .
5.
Select
3.11 Settings in Automower
The product has factory settings but the settings can be
adapted to each work area.
3.11.1 Schedule
Schedule you can change the schedule settings for
In
the product.
The schedule function controls which hours the product
should operate and not operate. When the product is not
operating it is parked in the charging station. The
operating hours and days can be seen in an overview in
®
the Automower
Connect app.
24 - Installation
®
range. If you move
®
®
Direct
®
Connect app on your
®
®
short-range.
®
Connect
The default schedule setting allows the product to
operate around the clock 7 days a week. This is
normally a suitable setting for a work area
corresponding to the maximum capacity. If the work
area is less than the maximum capacity the schedule
should be used to minimize wear on the grass and to the
product.
To calculate the schedule setting, refer to
the schedule setting on page 24 .
3.11.1.1 To edit the schedule settings
Settings > Schedule > Edit in the app.
1.
Select
2.
Select the pencil symbol in the app.
3.
Select which days of the week and hours the
product must operate.
Save .
4.
Select
3.11.1.2 To add a new schedule setting
Settings > Schedule > Edit in the app.
1.
Select
2.
Select the plus sign in the app.
3.
Select which days of the week and hours the
product must operate.
Save .
4.
Select
3.11.1.3 To calculate the schedule setting
1.
Calculate the dimension of your lawn in m
2
2
2.
Divide the m
/ ft
of the lawn with the approximate
operation capacity. Refer to table below.
3.
The result is equal to the number of hours that the
product must operate each day.
Note:
The operation capacity is approximate and is
calculated for flat and open work area. If the work area
has a lot of slopes or obstacles, you need to increase
the
Schedule settings.
Model
Approximate operation capaci-
2
ty, m
®
Automower
520H
92 / 990
®
Automower
550H
208 / 2240
2
Example: A lawn of 1000 m
®
Automower
550H.
2
1000 m
/ 92 ≈ 5 h.
2
10700 ft
/ 990 ≈ 5 h.
Days / week
h / day
7
5
To calculate
2
/ ft
2
.
2
/h / ft
/h
2
/ 10700 ft
, cut with an
Schedule settings
07:00 - 12:00 / 07:00
am - 12:00 pm
1457 - 005 - 16.10.2020
Advertisement
Table of Contents
