Use In Hazardous Areas According To The Atex Directive - Martin CleanScrape Operating Instructions Manual

1.4 Use in hazardous areas according to the ATEX directive

The standard version of the cleaner is NOT suitable for use in hazardous areas.
Martin Engineering offers special product variants that are suitable for use in
ATEX zones 22 and 21 under certain circumstances. These product variants
contain mandatory
characteristics.
Special instructions for the use of cleaners in ATEX zones must be observed.
Requirements for the use of these special product variants:
 Minimum ignition energy of the bulk material: >10 mJ
 Belt connections are vulcanised
 There are no substances in the bulk material which could generate
impact sparks on the cleaners.
 Coatings (corrosion protection) have standard layer thicknesses
(max.80µm)
 Earthing cables are properly installed (Bleeder resistance < 10
additional components
5
or have special
6
Ω)
M4033ESA-06/20
product