Appropriate Use; Conveyor Belt Systems With Open Transfer Systems; Use In Ex-Protection Areas; Operating Limits Of This Product - Martin XHD QC 1 Installation Manual

Primary cleaner
Hide thumbs Also See for XHD QC 1:
Table of Contents

Advertisement

2.2
2.2.1
2.2.2
2.2.3
© Martin Engineering GmbH

Appropriate Use

The MARTIN
®
XHD QC
ing conveyor belts. It can be used on conveyor belts with a width of
up to 3,000 mm and a belt speed of up to 6 m/s. The primary cleaner
can only be used directly on the head drum.
Any other use of this product is deemed to be inappropriate. If you
wish to use the product for any other purpose, please contact Martin
Engineering Customer Service. We will be happy to assist you with
product configuration.

Conveyor belt systems with open transfer systems

This installation manual describes the installation on a conveyor belt
system with an encapsulated delivery system. For the installation on
open delivery systems different MARTIN
be used.
If installation conditions prove to be difficult, as is the case with im-
passable static components, or using the head drum as the tension
point, Martin Engineering or a representative can help with the posi-
tioning or find customised solutions.

Use in EX-protection areas

Under certain circumstances, this product can also be used in po-
tentially explosive areas. Contact Martin Engineering for more infor-
mation on use in potentially explosive areas.
The use of the cleaner in a device protection category that is higher
than that specified or under operating conditions other than those
specified by Martin Engineering is not permissible or may be done
only if Martin Engineering has granted its approval.

Operating limits of this product

The use of the product mentioned here is allowed only within the
specified specifications. Using it in a higher than specified equip-
ment category or under operating conditions other than those
named and previously specified by Martin Engineering is considered
to be inappropriate use and can only be carried out if approved by
Martin Engineering.
If the product mentioned here is to be used for a different purpose,
then Martin Engineering or a representative can help with the prod-
uct configuration.
#1 primary cleaner is only used for clean-
®
installation consoles can
6
M3504UK-10/15

Advertisement

Table of Contents
loading

Table of Contents