Table of Contents
Advertisement
OFF:Disable TOT
4. Press
5
key to confirm and exit. Default:3.
P
APO (Auto power off)
Once APO is activated, the radio will be automatically switched off when the pre-set timer
is running to end.
1. Press and hold
key for over 2s to enter general setting menu.
2. Press
/
key to choose No.20 menu, LCD
1
2
P
P
displays"APO--OFF".
3. Turn selector knob to select the desired setting.
30MIN:Auto power off after 30m
1HOUR:Auto power off after 1h
2HOUR:Auto power off after 2h
OFF:Disable Auto power off
4. Press
key to confirm and exit.Default:OFF
5
P
DTMF Transmitting Time
1. Press and hold
key for over 2s to enter general setting.
2. Press
/
key to choose No.21 menu, LCD displays
1
2
P
P
"SPD--50".
3. Turn selector knob to select the desired setting.
30/50/100/200/300/500, which indicates the time for sending each DTMF signal & the
interval between each DTMF being sent.
40
4. Press
key to confirm and exit.Default:50MS.
5
P
Squelch level Setup
Setting the radio to a tight squelch level, you can avoid unwanted signals or noise, but you
may not receive a weak signal. Therefore, it will be better for you to select the normal
squelch level
1. Press and hold
key for over 2s to enter general setting menu.
2. Press
/
key to choose No.22 menu, LCD displays
1
2
P
P
"SQL--04".
3. Turn selector knob to select the desired squelch level.
OF-20 total 21,OF is min setting value(ON)
4. Press
key to confirm and exit.Default:04
5
P
NOTE: Press
,then turn selector knob also can select the desired squelch level. If the
2
P
transceiver has set at higher squelch level,it may fail to hear the calling.If set at lower squelch
level,the radio will be interfered.
Scan Stop Time Setup
There are 3 kinds of Scan Dwell Time for option.
1. Press and hold
key for over 2s to enter general setting menu.
2. Press
/
key to choose No.23 menu, LCD displays
1
2
P
P
"SCAN--TO".
3. Turn selector knob to select the desired Scan Dwell Time.
TO:it pauses 15s once scanning a matching signal,then resume scan.
41
Advertisement
Table of Contents
