Table of Contents
Advertisement
5. Turn selector knob or Mic's [
/
UP
frequency changed as per stepping.
6. Press any key except
and
2
P
NOTE: Under channel mode,this operation can be temporarily used by user.
Once the radio is turned off or switched to another channel,the temporary setting will be
erased.
Keypad Lockout
Avoiding unintentional operation, this function will lock main keys, all keys except
and
key are invalid.
1. Press
key until the
icon displays on the LCD, then
press
key until LCD displays
5
P
keypad lockout function is valid.
2. Repeat above operation,
icon disappears, it indicates keypad lockout function is
invalid.
Current Voltage Enquiry
This function will display Current Battery Voltage.
1. Press and hold
key, then press
current battery voltage.
2. Repeat above operation to return into VFO or Channel mode
NOTE: In voltage display mode, all functions and channel or frequency selection are invalid.
28
] key to change offset frequency, offset
DOWN
key to exit into standby.
icon, it indicates
key, LCD displays
2
P
Auto-Dialer Setup
This will automatically transmit pre-programmed and stored DTMF tones. And they are
often used to remote control electronic devices or AUTOPATCH phone systems available
on some repeater.
1. Press and hold
5
P
default data and current group displayed on left. If no data in current group,it shows"EMPTY".
2. Turn selector knob to choose group you desired. Total:16
group,01-16.
2
P
3. Press
key to enter into editing of current group,press
5
P
MIC's numeric keys to set your desired data.
4. The display scrolls when the 7th digit is entered. The numbers
0-9, --, A-D, * and # can be stored up to a total of 23 digits.
5. After editing,press PTT or
store edited DTMF signaling.
Transmitting Edited DTMF tones in the Auto-dialer memory
1. Press and hold
5
P
2. Turn selector knob to select desired transmitting group
3. Press PTT then
UP
key to enter the auto-dialer enquiry mode, LCD displays current
key to send current group and
1
P
key to enter into auto-dialer enquiry
or
key to transmit current selected DTMF tones.
1
P
29
Advertisement
Table of Contents
