Editing Channel Name; Reverse Tx/Rx; Talk Around - TYT TH-9000D User Manual

Hide thumbs Also See for TH-9000D:
Table of Contents

Advertisement

but dis-matching CTCSS/DCS.press [PTT] to emit error voice prompt and back to receiving
status.
OFF: Busy channel lockout is disabled.It can transmit in any receiving status.
4. Press
5
kdy to confirm and exit.
P

Editing Channel NAME

1. Press and hold
key for over 2s to enter general setting menu.
2. Press
/
key to choose No.11 menu, LCD displays
1
2
P
P
cursor and flashing.
3. Turn selector knob to select the desired letter,press
confirm selected letter and enter into next edition,Press
4. After edition,press
key to exit.
4
P
NOTE: In Frequency (VFO) mode ,this function will be auto-hidden.

Reverse TX/RX

TX frequency turns to RX frequency & RX frequency changes to TX frequency. The
signaling will also be reversed if CTCSS/DCS signaling exited in this channel.
1. Press and hold
key for over 2s to enter general setting menu
2. Press
/
key to choose No.12 menu, LCD displays "REV--OF".
P
1
P
2
3. Turn selector knob to select the desired setting.
ON:Enable Frequency Reverse
OFF:Disable Frequency Reverse.
4. After edition,press
5
key to exit.
P
36
5
key to
P
3
to return forward edition.
P

Talk Around

By Talk Around function,you can directly communicate with other radios in your group
in case the repeater is not activated or when you are out of the repeater range. The transceiver
will transmit by RX frequency with its CTCSS/DCS signaling.
1. Press and hold
key for over 2s to enter general setting
menu.
2. Press
/
key to choose No.13 menu, LCD displays
1
2
P
P
"TALK--OF".
3. Turn selector knob to select the desired setting.
ON:Enable Talk Around
OFF:Disable Talk Around
4. After edition,press
5
key to exit.
P
Voice Compander
Enable this function to reduce background noise and enhance audio clarity, especially
in long range communication.
1. Press and hold
key for over 2s to enter general setting menu
11. Press
/
key to choose No.14 menu, LCD displays "COMP--OFF".
P
1
P
2
3. Turn selector knob to select the desired setting.
ON:Enable compander
OFF:Disable compander
4. Press
key to confirm and exit. Default: OFF
5
P
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-9000du

Table of Contents