Table of Contents
Advertisement
5. Press
kdy to confirm and exit.
5
P
NOTE: Content and name of 2TONE will be edited by programming software.
This radio only query edited group or name.If there is corresponding name for 2TONE,this
operation will display 2TONE corresponding name.
Sending 5-Tone Call
1. Press and hold
key for over 2s to enter general setting menu
2.Press
/
key to chooseNo.04 menu, LCD displays
1
2
P
P
"5TON XX","XX"indicates the group in the list.
3. Turn selector knob to select the desired sending 5TONE
group,Press PTT to transmit selected group.
4. Total:100groups,00-99,Default:00.
5. Press
key to confirm and exit.
5
P
NOTE: Content and name of 5TONE will be software.This radio only query edited group or
name.If there is corresponding name for 5TONE,this operation will display 5TONEcorresponding
name.
Sending DTMF call
1. Press and hold
key for over 2s to enter general setting menu.
2.Press
/
key to choose No.05 menu, LCD
1
2
P
P
displays "DTMF XX","XX"indicates the group in the list.
3. Turn selector knob to select the desired sending DTMF group,
Press PTT to transmit selected group.
32
4. Total:16groups,00-16,Default:00.
5. Press
key to confirm and exit.
5
P
Signaling Combination setup
This function is to improve the level of protecting the radio against receiving irrelative signal.
1. Press and hold
key for over 2s to enter general setting
menu.
2. Press
/
key to choose No.06 menu, LCD displays
1
2
P
P
"SPK--SQ".
3. Turn selector knob to select the desired combination
If select "SQ",it indicates you can hear the calling from caller when receive a matching carrier.
If LCD displays "CTC",it indicates you can hear the calling from
caller when receive a matching carrier and CTCSS/DCS signaling .
If LCD displays "TON",it indicates you can hear the calling from
caller when receive a matching carrier and DTMF/2TONE/5TONE
signaling .
If LCD displays "C*T",it indicates you can hear the calling from
caller when receive a matching carrier and CTCSS/DCS and
DTMF/2TONE/5TONE signaling .
If LCD displays "C/T",it indicates you can hear the calling from
caller when receive a matching carrier and either CTCSS/DCS DTMF/2TONE/5TONE signaling.
5
4. Press
P
key to confirm and exit.
33
Advertisement
Table of Contents
