Table of Contents
Advertisement
Keyboard Language
To change the keyboard language, do the following:
1. Invoke HSM (see page 20
2. Press and release [F6] [nn] [Enter].
Note: nn is a two-digit number that represents the keyboard language code
(US English: 33; French: 08; Japanese: 15; German: 09).
Buzzer Control
The buzzer can be turned on or off. To turn the buzzer on/off, do the following:
1. Invoke HSM (see page 20
2. Press and release [B].
Hotkey Port Switching
To enable/disable hotkey port switching, do the
1. Invoke HSM (see page 20).
2. Press [X] [Enter].
When disabled, port switching hotkeys [Scroll Lock] [Scroll Lock] (and the
alternative [Ctrl] [Ctrl]) will not work.
Firmware Upgrade Mode
To enter Firmware Upgrade Mode, do the following:
1. Invoke HSM (see page 20).
2. Key in: upgrade
3. Press [Enter].
The front panel LEDs flash to indicate Firmware Upgrade Mode is in
effect.
Note: To exit Firmware Upgrade Mode, you must power off the switch.
).
).
Chapter 4. Hotkey Operation
following:
23
Advertisement
Table of Contents
