Restore Default Settings - ATEN CS1922M User Manual

CS1922M / CS1924M RS-232 Commands

Restore Default Settings

The Restore Default Settings command allows you to reset all of the settings
back to the default. The default setting is off.
Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Command
reset
Control
on
Enter
Enter
Restore Default Value Command
The available formula for the Restore Default Settings command is as follows:
1. Command + Control + [Enter]
For example, to restore all CS1922M / CS1924M settings back to the default,
type the following:
reset on [Enter]
14
Description
Restore Default Settings Command
Description
Enable restore default values
Description
Enter and send out command