Mouse Port Switching
Mouse Port Switching allows you to switch ports using mouse wheel button
(clicked twice). For Mouse Port Switching to work, Mouse Emulation must be
enabled. To enable/disable mouse port switching, do the following:
1. Invoke HSM (see page 20).
2. Press [W].
Specific PC Port Monitor Re-detection
If the monitor's display is blank, use this hotkey to re-detect the monitor's
EDID. Specific PC port monitor re-detection can be enabled or disabled. The
default setting is disabled. To enable specific PC port monitor re-detection, do
the following:
1. Invoke HSM (see page 20
2. Press [Q] [n] [Enter].
Note: The n stands for the computer's Port ID number (1, 2, or 3). See Port
ID Numbering, page 16 for details. Replace the n with the
appropriate Port ID when entering Hotkey combinations.
N-Key Rollover Keyboard Supporting Function
To enable/disable N-key rollover keyboard supporting function, do the
following:
1. Invoke HSM (see page 20
2. Press [K] [Enter].
).
).
Chapter 4. Hotkey Operation
25