Hitachi VSP G130 Installing Instructions page 20

Setting
UTC Timezone
Automatically adjust clock for Daylight Saving Time
Use NTP Server
Synchronizing Time
13. Confirm or change the network settings that you entered earlier in this procedure, and then click Apply.
https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-03-0x/Installation/0...
Description
Time zone in which the storage system is located.
If the time zone in which the storage system is located
follows Daylight Saving Time, check this box to have
the storage system automatically adjust its time twice
a year.
Determines whether the storage system time is
synchronized with an NTP server.
◦ Yes: Synchronize system time with an NTP
server. Enter the IP address or domain name of
the NTP server. To add more than three servers,
click the + Add NTP Server button. To
synchronize the system time to the NTP server
time now, check Synchronize immediately.
◦ No: Do not synchronize system time with an NTP
server. In Date & Time, enter the date and time
that the storage system will use.
To synchronize the storage system time with the NTP
server at a specific time, enter the time when the two
will be synchronized.
Updated: Mon, 01 Feb 2021 07:07:26 GMT
Powered by
20