Technical Data - LaserLiner DigiLevel Pro 40 Manual

Calibration
The measuring device must be calibrated and tested on a regular
basis to ensure it is accurate and working properly. We recommend
carrying out calibration once a year. Contact your distributor or
the UMAREX-LASERLINER service department.

Technical data

Electronic measuring
precision
Vial accuracy
Display accuracy
Laser wavelength
Laser class
Power supply
Operating time
Radio module
operating data
Operating conditions
Storage conditions
Dimensions 40
Dimensions 60
Dimensions 80
Weight 40/60/80
Subject to technical change without notice. 19W43
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must
be collected separately for disposal according
to the European Directive on waste electrical
and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=AHJ
DigiLevel Pro 40/60/80
± 0.05° at 0° ... 1°
± 0.1° at 1° ... 89°
± 0,05° at 89° ... 90°
± 0,5 mm/m
2 decimal places
635 nm
2 / < 1 mW (EN 60825-1:2014/AC:2017)
2 x 1.5V LR03 (AAA)
with laser: approx. 10 hours
without laser: approx. 55 hours
Bluetooth LE 4.x interface;
Frequency band: ISM band
2400–2483.5 MHz, 40 channels;
Transmission power: max. 10 mW;
Bandwidth: 2 MHz; Bit rate: 1 Mbit/s;
Modulation: GFSK/FHSS
-10°C ... 50°C, max. humidity 80% rH,
no condensation, max. working altitude
2000 m above sea level
-20°C ... 70°C, max. humidity 80% rH
400 x 63 x 33 mm (W x H x D)
600 x 63 x 33 mm (W x H x D)
800 x 63 x 33 mm (W x H x D)
548 g / 722 g / 968 g (incl. batteries)
15
EN