Technical Data - LaserLiner SuperCross-Laser 2GP Manual

To avoid interference/disruption, always keep the implant or device a safe distance of at least 30 cm away from
the magnet.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
Calibration
The measuring device should be calibrated and tested on a regular basis to ensure it is accurate and working
properly. We recommend the measuring device is calibrated every 1 - 2 years. If necessary, contact your distributor
or the UMAREX-LASERLINER service department.

Technical data

(Subject to technical changes without notice. 20W10)
Self-levelling range
Accuracy
Levelling
Visibility (typical)*
Working range with hand receiver
Laser wavelength
Plumb laser wavelength
Reference beam wavelength
Laser class
Power supply
Operating time
Operating conditions
Storage conditions
Dimensions (W x H x D)
Weight
* at max. 300 lux
EU directives and disposal
This device complies with all necessary standards for the free movement of goods within the EU.
This product is an electric device and must be collected separately for disposal according to
the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=AJF
± 4°
± 0.5 mm / m
automatic
40 m
(depends on how the technology affects the difference in brightness) 40 m
515 nm
650 nm
650 nm
2 / < 1 mW (EN 60825-1:2014/AC:2017)
4 x 1,5V LR6 (AA)
approx. 9 hours
0°C ... 50°C, max. humidity 80% rH, no condensation,
max. working altitude 4000 m above sea level
-10°C ... 70°C, max. humidity 80% rH
124 x 119 x 66 mm
430 g (without accessories and batteries)
SuperCross-Laser 2GP
13
EN