Page 2
Important Safety Instructions: Please read all instructions carefully before assembling. For your safety, assembly by two or more adults is required. Keep instructions for future use. Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item.
Page 3
Hardware Included: Long Hex Screw Short Hex Screw Short Wood Dowel Long Wood Dowel Screw Dia. 6mm x 32mm Dia. 6mm x 22mm Dia. 8mm x 30mm Dia. 8mm x 50mm Dia. 3mm x 12mm Anti-Tip Kit Flat washers Spring washers Dia.
Page 4
Attach Panel (E) to Lower Layer (G) with long wood dowels (R). Attach Middle Layer (F) to Right Side Panel (J) with short wood dowel (Q) as shown. ...
Page 5
Attach the Left Side Panel (I) to Bottom (H) and layers with short wood dowels (Q), long hex screws (N), spring washers (U) and Flat washers (T) by using Allen wrench (P). Attach Panel (C) to Top Layer (D) with long wood dowels (R). C ...
Page 6
11. Secure the roof with long hex screws (N), spring washers (U) and Flat washers (T) by using Allen wrench (P). 12. Attach Back Panels (K/L/M) to back of book case with screws (S) as shown. DO NOT over tighten the screws. NOTE: USE THE ANTI-TIP KIT PROVIDED TO SAFELY SECURE YOUR PRODUCT(S).
Page 7
FURNITURE TIPPING RESTRAINT WARNING: This product is only a deterrent. It is not a substitute for proper adult supervision. Manufacturer assumes no liability for improper installation or excessive loads placed on screws, brackets or straps. Young children may be injured by tipping furniture and the use of a tipping restraint is highly recommended. When properly installed, this restraint will provide protection against tipping of furniture. This tipping restraint MUST be secured to a wall‐stud or wall structure of similar strength. ...
Need help?
Do you have a question about the DOLLHOUSE and is the answer not in the manual?
Questions and answers