Generac Power Systems Protector Series Installation Manuallines page 53

Active Alarm LED
LOW BATTERY YELLOW
BATTERY
YELLOW
PROBLEM
CHARGER
YELLOW
WARNING
SERVICE A YELLOW
SERVICE B YELLOW
INSPECT BATTERY YELLOW
CHARGER
YELLOW
MISSING AC
AUXILIARY
RED
SHUTDOWN
Installation Guidelines For Spark-Ignited Stationary Generators
Problem
Yellow LED illuminated in
any state.
Yellow LED illuminated in
any state.
Yellow LED illuminated in
any state.
Yellow LED illuminated in
any state.
Yellow LED illuminated in
any state.
Yellow LED illuminated in
any state.
AC input to battery char-
Inspect connections at
ger circuit missing for
greater than 5 minutes
during charging cycle.
Unit either shuts down or
does not start when one
or both switches are OFF
(O).
Troubleshooting/Quick Reference Guide
Action
Clear alarm. Check battery option in con-
See screen for addi- trol menu. If it states battery is GOOD, con-
tional information. tact an IASD. If it states CHECK BAT-
TERY, replace battery.
See screen for addi-
Contact an IASD for assistance.
tional information.
See screen for addi-
Contact an IASD for assistance.
tional information.
See screen for addi- Perform SERVICE A maintenance. Press
tional information. ENTER to clear.
See screen for addi- Perform SERVICE B maintenance. Press
tional information. ENTER to clear.
See screen for addi-
Inspect battery. Press ENTER to clear.
tional information.
transfer switch, fuses Contact an IASD for assistance.
in transfer switch.
Clear alarm and verify both auxiliary shut-
See screen for addi- down switches are ON (I). See
tional information. Auxiliary Shutdown Switch Operation
for more information.
Solution
Testing
49