Generac Power Systems Protector Series Installation Manuallines page 2

Use this page to record important information about this generator.
Model:
Serial:
Prod Date Week:
Volts:
LPV Amps:
NG Amps:
Hz:
Phase:
Controller P/N:
ii
Record the information found on the unit data label on this
page. For location of the unit data label, see owner's
manual. The unit has a label plate affixed to the back of the
control panel, inside the engine compartment.
Always supply the complete model and serial numbers of the
unit when contacting an Independent Authorized Service
Dealer (IASD) about parts and service.
Operation and Maintenance: Correct maintenance and
care of the unit ensures a minimum number of problems, and
keeps operating expenses at a minimum. It is the operator's
responsibility to perform all safety inspections, to verify all
maintenance for safe operation is performed promptly, and
to have the equipment inspected periodically by an IASD.
Normal maintenance, service, and replacement of parts are
the responsibility of the owner/operator and are not consid-
ered defects in materials or workmanship within the terms of
the warranty. Individual operating habits and usage may con-
tribute to the need for additional maintenance or service.
When the generator requires servicing or repairs, Generac
recommends contacting an IASD for assistance. Authorized
service technicians are factory-trained and are capable of
handling all service needs. To locate the nearest IASD,
please visit the dealer locator at:
www.generac.com/Dealer-Locator.
WARNING
CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov.
(000393a)
Installation Guidelines For Spark-Ignited Stationary Generators