Table of Contents
Advertisement
MoIP Transmitter B-900-MOIP-4K-TX-2AC
A
E
A. Power Indicator
On: Power on | Blinking: Booting | Off: Power off
B. System Status Light
On: Connected to network with source present | Off: Not connected to network |
Blinking: Connected to network and no source present.
C. DTS LED
Blue = DTS Surround; Red = DTS HD; Purple =DTS HD Master Audio.
D. Dolby LED
Blue = Dolby Digital; Red = Dolby Digital Plus; Purple = Dolby True HD.
E. Network Port
Provides access to network and power via Power-over-Ethernet (POE).
F. SPDIF Out
For future use only.
G. L/R Audio Out
RCA analog audio de-embedding of 2-channel PCM audio.
H. Audio In
3.5 mm input for embedding audio to replace HDMI audio.
I. RS-232
RJ45, RS-232, (TX, RX, Ground), EIA-561 pin out.
J. HDMI IN/OUT
HDMI source input and HDMI loop output for local display.
K. IR Receiver
3.5 mm mini Mono/Stereo for external receivers.
L. IR Flasher
3.5 mm mini Mono output to IR emitter.
M. Factory Reset
Press and hold for 10 seconds to restore to factory settings.
N. 12 V 2A Power Connection
12VDC 2A locking connection for external power supply
B
C
D
F
G
H
I
J
6
K
L
M
N
(not
included).
Advertisement
Table of Contents
