Table of Contents
Advertisement
GETTING STARTED
To get started, you need:
• 1× per source: MoIP Transmitter
• 1× per display: MoIP Receiver
• 1× MoIP Controller B-900-MOIP-4K-CTRL
• 1× Layer 2 Managed switch
• Sources, Displays, HDMI cables and category cabling
MoIP Controller B-900-MOIP-4K-CTRL
Reboot
B
A. Status LED
Solid during system boot | Blinks during normal operation.
B. Reboot Button
Use a pin to press the recessed button to restart the controller.
C. USB Ports
For use with a USB-to-Ethernet adapter. See the
more information.
D. Network/LAN Port
Connect to MoIP switch to provide access to MoIP transmitters and receivers.
E. HDMI Port
Not used for the MoIP system.
F. 12 VDC Power Connection
Connect the provided power supply.
G. Factory Default button
Use a pin to press the recessed button 3 times within 10 seconds to restore factory
settings.
A
B-900-MOIP-4K-CTRL
CONTROLLER
Network
+5VDC
D
E
F
C
Network Troubleshooting
4
Factory Default
G
section for
Advertisement
Table of Contents
