Table of Contents
Advertisement
MoIP Transmitter B-900-MOIP-4K-TX
A
C
A. Power Indicator
On: Power on | Blinking: Booting | Off: Power off
B. System Status Light
On: Connected to network with source present | Off: Not connected to network |
Blinking: Connected to network and no source present.
C. Network Port
Provides access to network and power via Power-over-Ethernet (POE).
D. DIP Switches
Switch 1: IR receiver on/Off | Switch 2: DTE/DCE .
E. 3.5 mm Input
Analog audio embedding to replace HDMI audio.
F. L/R Audio Out
RCA analog audio de-embedding of 2-channel PCM audio.
G. RS-232
RJ45, RS-232, (TX, RX, Ground), EIA-561 pin out.
H. HDMI IN/OUT
HDMI source input and HDMI loop output for local display.
I. IR Receiver
3.5 mm mini Mono/Stereo for external receivers.
J. IR Flasher
3.5 mm mini Mono output to IR emitter.
K. Factory Reset
Press and hold for 10 seconds to restore to factory settings.
L. 12 V 2A Power Connection
12VDC 2A locking connection for external power supply
B
D
E
F
G
H
5
K
I
J
L
(not included).
Advertisement
Table of Contents
