Table of Contents
Advertisement
3. Verify Jumbo Frame
SETTINGS >
Choose
default value is 9216 the maximum is acceptable.
4. Set up the MoIP Controller
Connect the controller to the MoIP Switch and use the external power supply to connect it to
an AC outlet. Then, claim the
IMPORTANT:
This is
1. Document the MoIP Controller MAC Address and Service Tag on the box or on the bottom
of the device
2. Log into OvrC and go to
3. Manually enter MAC Address and Service Tag to claim the device.
PORTS, then verify
Jumbo Frame
MoIP controller
REQUIRED
for firmware maintenance.
Customer
> Devices, click
16
is set to greater than 8,000 Bytes. The
on OvrC and access the local UI.
+
Device.
Advertisement
Table of Contents
