Table of Contents
Advertisement
10. Update TX and RX Firmware
Once discovered, the controller automatically pushes firmware updates to the transmitters and
receivers (if necessary).
IMPORTANT:
Do not remove any devices or restart until all have completed update status.
11. Identify Receiver-Display and Transmitter-Source Pairs (Recommended)
i
1. Click the
under each device to name each transmitter. Use the screen capture from each
source to help identify each transmitter.
2. Record the Transmitter number, MAC address and connected source for use during control
system integration.
Identify Mode
3. Activate
displays the MAC address for the receiver connected to that display.
4. Name each receiver based on the MAC address.
5. Record the Receiver number, MAC address, and connected display type/location for use
during control system integration.
Note:
In
Test
mode, 4K content does not show on a 1080p TV or via 1.4 HDCP connection.
Downscaling can be configured to fix this by clicking
via the MoIP controller UI. Each display connected to a receiver
19
i
next to each receiver.
Advertisement
Table of Contents
