Table of Contents
Advertisement
Connectors and Switches on the Back of Your Cable Modem
19
Cable RF Connector: This is where you connect the
coaxial cable that leads to your splitter or your cable wall
jack.
USB Port: This is where you plug the included USB cable
when performing a USB installation. The other end
connects to an active USB port on your computer
RJ-45 Jack: This is where you plug the included RJ-45
Ethernet cable when performing an Ethernet installation.
The other end connects to the RJ-45 jack on your network
interface card (NIC) or active Ethernet port.
Power Jack: This is where you plug in the power adapter
that came with your cable modem. Remember to use only
the power supply that came with your cable modem.
Reset Button: You can click this button when you are
having trouble connecting to your Broadband Service
Provider (BSP). This initiates a full reset of the modem and
re-initiates the channel scan that occurs every time our
modem is powered on. You can click the button by
inserting a ballpoint pen into the hole and pressing until
you feel the button click.
Advertisement
Table of Contents
