3Com OfficeConnect 3CR29210 Getting Started Manual page 16

Officeconnect cable modem external

Hide thumbs Also See for OfficeConnect 3CR29210:

Table of Contents

Enlarged version

2: H

HAPTER

ARDWARE AND

mounting

holes

These slots fit over the heads of wall-mounting screws to

secure the modem to the wall. A mounting template for

marking the location of the mounting screws is included at

the back of this guide.

1 Remove the mounting template from the back of this

guide.

2 Place the mounting template against the wall at the

location chosen for the cable modem. The template should

be parallel to and at least 50 cm from the floor. Insert

drawing pins through the template cross hairs into the wall

to mark the locations for the screws.

3 Secure the mounting screws into the wall. Do not drive the

screws flush to the wall. The screw heads should be at least

6 mm away from the wall so it can lock into the slots on

the modem's case.

4 Fit the slots over the screw heads and let the modem slide

down into position.

OFTWARE

NSTALLATION

Table of Contents