Emerson DSM314 User Manual page 99

User Manual
GFK-1742F
24v DC Optically Isolated Output
Circuit Servo Axis 1-4 Circuit
Identifier Function
OUT1 Faceplate 24v Output (+)
Faceplate 24v Output (-)
I/O Type:
Circuit Type:
Output Current:
Output Voltage Drop:
Note:
Installing and Wiring the DSM314
Aux 2-4 Axis Circuit
Function
Faceplate 24v Output (+)
Faceplate 24v Output (-)
Output is protected by a 30v transzorb and a 0.2-amp Polyswitch. If a short circuit occurs, the
output will automatically switch to a high impedance state until the load is removed. The load
should not be reapplied for 60 seconds. This is a dc output and it will appear to be always ON if
connections to it are reversed.
Signal Name (X Faceplate
= A, B, C, or D Pin
Connector)
OUT1P_X 18
OUT1M_X 36
24v DC Optically Isolated Output
Isolated Solid-State Relay (SSR)
125 mA continuous, 500 mA for 10 ms (resistive or
inductive)
1.0 v max at 0.125 amps
Chapter 3
Jan 2020
Auxiliary Servo
Terminal Terminal
Board Board
18 8
36 16
88