Ndis Drivers; Additional Drivers; Using Transcend Pc Link Smartagent Software - 3Com EtherLink 3C590 User Manual

3-12 C 3: I
HAPTER NSTALLING THE

NDIS Drivers

If you have installed NDIS drivers in a computer with multiple
3Com adapters, you must specify the slot number for each
adapter as documented in the PROTOCOL.INI file on the
3C59X EtherDisk diskette. The file is located on the startup
diskette or the hard drive. The NDIS drivers are as follows:
NDIS 2.0x
NDIS 3.0x
Windows for Workgroups
Windows NT, version 3.5

Additional Drivers

Contact your 3Com reseller for information on UNIX and
other drivers.

Using Transcend PC Link SmartAgent Software

3Com's SmartAgent driver agents, which provide network
management capabilities for adapters and PCs, are available
with Transcend PC Link SmartAgent software or on 3Com's
bulletin board service. (For information on 3Com's BBS, refer to
Appendix C, "Technical Support.") NetWare DOS ODI client
driver agents can be installed after ODI drivers are loaded.
NDIS DOS and OS/2 driver agents can be installed after NDIS
drivers are installed. NetWare 3.x servers require a NetWare
Loadable Module (NLM) driver agent, which is available only
with the 3Com Transcend PC Link SmartAgent product.
The driver agents occupy less than 6 KB on client PCs.
They are fully SNMP-compliant when used with SmartAgent
SoftHub /DOS or SoftHub/NLM software, one copy of which is
included with each copy of Transcend PC Link SmartAgent,
Transcend WorkGroup Manager, or Transcend Enterprise
Manager software.
N D
ETWORK RIVERS
EL59X.DOS
EL59X.386
EL59X.SYS