3Com EtherLink 3C985B-SX Installation And User Manual page 26

Gigabit etherlink server network interface cards (nics) for novell netware

Hide thumbs Also See for EtherLink 3C985B-SX:

Table of Contents

Installing the Driver Software

set Time Zone = PST8PDT

set Daylight Savings Time Offset = 1:00:00

set Start Of Daylight Savings Time = (APRIL SUNDAY FIRST 2:00:00 AM)

set End Of Daylight Savings Time = (OCTOBER SUNDAY LAST 2:00:00 AM)

set Default Time Server Type = SINGLE

# Note: The Time zone information mentioned above

# should always precede the SERVER name.

set Bindery Context = O=3Com

file server name MARS

ipx internal net 34881EEE

load 3c986 slot=4 frame=Ethernet_802.2 name=3c986_1_e82_2

bind ipx 3c986_1_e82_2 net=aaaa

load 3c986 slot=4 frame=Ethernet_802.2 name=3c986_1_e82_3

bind ipx 3c986_1_e82_3 net=bbbb

mount all

set immediate purge of deleted files = on

set upgrade low priority threads = on

set display spurious interrupt alerts = on

set display lost interrupt alerts = on

NOTE: If you modify any NIC parameters, you must reboot the system before the changes will take effect. If

you make changes and do not reboot, you may experience conﬁguration problems. If no conﬁguration

changes have been made, you can click the "No" button to close the conﬁguration session without

restarting your system.

Table of Contents

Troubleshooting