Required Tools And Adhesives; Symbols Explication; Safety Notes - GRAUPNER Husky 1800S Manual

Required tools and adhesives

Symbols explication

Safety notes

20 / 76
Scalpel knife
Scissors
Triangle ruler
Tweezers
Cross Screwdriver
Fork key 3.5/5/5,5/8/10/13
Hex key 1,5 mm
Hex key 2 mm
Hex key 2,5 mm
Drill 1,2 mm
Drill 1,8 mm
Drill 2,0 mm
Cyano glue thick
Activator for cyano glue
Phon
Always observe the information indicated by this warning sign. Par-
!
ticularly those which are additionally marked with the CAUTION or
WARNING. The signal word WARNING indicates the potential for
serious injury, the signal word CAUTION indicates possibility of
lighter injuries.
The signal word
Attention indicates potential damages to objects.
Centre of gravity
This symbol shows the position of the center of gravity and is sup-
ported with measurements or arrows if necessary.
Gluing notes!
This symbol shows that cyano glue thick no. 5821 is to be used and
is supported with measures or arrows if necessary. Pay attention to
the hazard notices on the package.
General
These safety instructions are intended not only to protect your own
!
and other people's safety, but also to protect the product. Therefore
please read this section very carefully before using the product!
 After you perceive your model, check if all components are inside
the package and eventual damages.
Note indicates potential malfunctions.
No. 982
No. 5779.0
No.B8001
No.B8001
No.B8001
No. 5821
No.953.150
13410_13410.100_HU_V.1