modway MOD-6054 Manual page 3

MOD-6054, MOD-6055, MOD-6056
STEP 3:
1. Attach the Support leg(5) as shown in diagram. Place the JCBC bolt 50MM(D)) and tighten by using M4 Allen Key(G) After, place Adjuster (I) to
bottom support leg(5) as diagram shown.
Cx3 Gx1 Ix3
Hardware & Tool required
STEP 4:
Attach Slat (7) into bed by inserting CSK screw (F) into the predrilled holes on the Slat (7) . Tighten with Screwdriver (Not provided) .
Screwdriver (Not provided) .
Fx6
Hardware & Tool required
Customer Service 908-368-1025 www.modway.com Page 3/3