Advertisement
IN100 Cylindrical Lock
9.
Install Outside (Reader) Escutcheon and Inside Mounting Plate
a. Orient the reader so the LED lens is at the top.
b. Feed reader harness through door (from outside to inside).
c. Install the reader to the outside of door by aligning the mounting posts with the door preparation holes.
Hold the reader flush against door while ensuring proper alignment.
LED
Reader Assembly
with Harness
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
Outside Face of Door
Fig. 9a
11
Advertisement
