Snmp Management; Setting Up Command Line Interface Management; Cli Management Via The Console Port - 3Com SuperStack 3 3226 Getting Started Manual

40 C 3: S
HAPTER ETTING

SNMP Management

Setting Up
Command Line
Interface
Management
CLI Management via
the Console Port
U M
P FOR ANAGEMENT
Figure 14 Web interface management over the network
Refer to "Setting Up Web Interface Management" on page 42.
You can manage a Switch using any network management workstation
running the Simple Network Management Protocol (SNMP) as shown in
Figure 15. For example, you can use the 3Com Network Supervisor
software that is provided on the CD-ROM that accompanies your Switch.
Figure 15 SNMP management over the network
Refer to "Setting Up SNMP Management" on page 43.
This section describes how you can set up command line interface
management using a local console port connection or over the network.
To manage a Switch using the command line interface via the local
console port connection:
1 Ensure you have connected your workstation to the console port correctly
as described in "Connecting to the Console Port" on page 33.
2 Your Switch is now ready to continue being managed and/or configured
through the CLI via its console port.