Command Line Interface Management Using Ssh; Web Interface Management; Snmp Management - 3Com 3CR17561-91-US - Switch 4500 26PORT Managed 24 10/100 2 Gbe Stackable RJ45 Getting Started Manual

Methods of Managing a Switch 43
Command Line The Switch 4500 supports Secure Shell version 2.0 (SSHv2.0), allowing
Interface secure access to the Command Line Interface of the Switch.
Management using
If you use SSH to administer your Switch and the network traffic is
SSH
intercepted, no passwords or configuration information will be visible in
the data. To securely administer the Switch using the Command Line
Interface you need a third party SSH client.
Web Interface Each Switch has an internal set of web pages that allow you to manage
Management the Switch using a Web browser remotely over an IP network (see
Figure 14).
Figure 14 Web Interface Management over the Network
Switch
Workstation
Connect over Network
via web browser
Refer to "Setting Up Web Interface Management" on page 58.

SNMP Management

You can manage a Switch using any network management workstation
running the Simple Network Management Protocol (SNMP) as shown in
Figure 15. For example, you can use the 3Com Network Director
software, available from the 3Com website.
Figure 15 SNMP Management over the Network
SNMP Network Management
Switch
Workstation
Connect over Network
using SNMP
Refer to "Setting Up SNMP Management V1 or V2" on page 59.