3Com SuperStack 3 3226 Getting Started Manual page 35

If you have not logged onto the Switch before, you will be prompted to
enter a new password. 3Com recommends that you change your
password from its default blank setting.
2 At the login and password prompts, enter admin as your user name and
enter your password at the password prompt (or just press Return if you
have not yet set a password). If you have logged on correctly, the
top-level menu of the command line interface is displayed as shown in
the example in Figure 9.
Figure 9 Example top-level command line interface menu
Menu options: -----------3Com SuperStack 3 Switch 3226-----------------------
bridge
feature
gettingStarted
logout
physicalInterface
protocol
security
system
trafficManagement
Type ? for help.
------------------------------------- (1)------------------------------------
Select menu option:
3 At the Select menu option prompt you can either:
enter the protocol ip basicConfig command. At the Enter
configuration method prompt enter manual. The screen
prompts you to enter IP information.
or
enter the gettingStarted command. At the Enter
configuration method prompt enter manual. The screen
prompts you to enter IP information.
4 Enter the IP address, subnet mask, and gateway IP address for the Switch.
The screen displays a summary of the information entered.
If using the gettingStarted command you will then be prompted to
enter system information, change passwords, and then given the option
to carry out advanced configuration.
The initial set up of your Switch is now complete and the Switch is ready
for you to set up your chosen management method. See "Methods of
Managing a Switch" on page 39.
Manually Configuring IP Information
- Administer bridge-wide parameters
- Administer system features
- Basic device configuration
- Logout of the Command Line Interface
- Administer physical interfaces
- Administer protocols
- Administer security
- Administer system-level functions
- Administer traffic management
35