Maintenance; Specifications; Product Identifi Cation; Product Description - CAMPAGNOLA POWER 12 Use And Maintenance Manual

2 - SAFETY PRECAUTIONS

2.3 Maintenance

WARNING!
Before performing any maintenance operations or adjustments of the mechanical parts of the equipment, wear protec-
tive shoes, gloves and goggles.
• Routine maintenance and repairs can be carried out only by an operator with the necessary physical and intellectual
qualifi cations.
• Special maintenance and repairs can be carried out only by a service mechanic.
• Keep bystanders away when servicing or repairing the machine.
• Only service mechanics are authorized to inactivate the safety devices provided on the machine when maintenance is to
be performed. It is their responsibility to safeguard the operators and the machine. The safety devices shall be activated as
soon as the maintenance operations have been completed.
• Before any maintenance operations or mechanical adjustments are carried-out, switch the tool off.
• All maintenance procedures not dealt with in this manual are to be performed at a CAMPAGNOLA S.r.l Authorized Service
Point.
• When maintenance or repairs have been completed, the machine can be started again only if duly authorized by the
service mechanic. The service mechanic must make sure:
- work has been completed;
- the machine runs in a trouble-free way;
- the safety devices are activated;
- no one is working on the machine.
3

- SPECIFICATIONS

3.1 Product identifi cation
The tool identifi cation details are indicated on the plate (5) on the handgrip, on the tool box and in the CE compliance certifi cate
in this manual.

3.2 Product description

The electro-mechanical, battery supplied POWER 12 unit has been created to operate harvesting tools. The scheme "PRODUCT
ASSEMBLY" POSSIBILITIES (in par. 2.1.1) shows the possible combinations among power unit, extension pole and harvesting
head, in order to fi nd the best solution for the task to be carried out.
The power unit is fi tted with an energy saving and a mechanical parts protecting system, automatically decreasing the tool speed
after 6 seconds since it has got out of the branches, this way limiting its wear-and-tear. On the contrary, when the tool penetrates
the branches, it automatically reaches the selected speed again.
The unit can be operated by two kinds of 12 V battery: either a lead or a lithium battery. The latter is carried in an ergonomic
backpack. The battery capacity (ampere) determines the work duration only. The power unit is composed by a hand grip body,
a gearbox and an electronic control card. On the hand grip body (1) there are an ON/OFF switch (7), which starts and stops the
tool, a speed selector (8), which varies the engine rotation speed (either 1140 or 1230 rpm) and a red led light (9), which shows
if the tool is on or off.
On the body there is a connector (4), which, by means of a cable, joins the power unit with the battery. The lead battery is fi tted
with a 15 m cable (14) and connecting clamps (6). The lithium battery is fi tted with a 1.5 m cable (15).
On the top of the hand grip body (1) there is a clamp connection (3) for the fi xed (12) or telescopic (11) extension pole, which
transmits motion to the tool.
19 - 68