Parts Supplied; Recommended Use; Tool Parts; Technical Details - CAMPAGNOLA POWER 12 Use And Maintenance Manual

3 - SPECIFICATIONS
IMPORTANT!
In case of excessive efforts a temporary stop of the tool could occur. This would be driven by the electronic card in
order not to damage the unit. After having removed the tool from the branches and having switched off and then on the
electronic card by means of the ON/OFF switch (7), the tool can be started again.
WARNING!
Please mind the tool was created for the aim indicated in this manual. It is not possible to connect the battery of one
version with the cable of the other one.

3.3 Parts supplied

• Use & maintenance manual.

3.4 Recommended use

The tool was created to be used according to the ways and limits previously described.
WARNING!
• Any other use has to be considered improper and potentially dangerous for the operators' safety. This would make
any warranty claims void.
• If it is not used for the purposes it was designed for, the tool may get damaged and cause serious injuries to per-
sonnel and bystanders and damages to things.

3.5 Tool parts

POS. DESCRIPTION
1 Hand grip
2 Extension pole locking screws
3 Extension pole fi xing clamp con-
nection
4 Shells connector
5 Plate
6 Battery pliers
7 ON/OFF switch
8 Speed selector
9 Led light
10 Extension pole shaft
11 Telescopic extension pole
12 Fixed extension pole
13 Power supply cable connector
14 15 m power supply cable
15 1.5 m power supply cable

3.6 Technical details

• Power unit weight: .................................................................... 1.0 kg
• Engine rotation speed I: ............................................................ 1140 ± 20 rpm
• Engine rotation speed II: .......................................................... 1230 ± 20 rpm

3.7 Safety devices

• Built-in safety device: stops the tool automatically in case of motor overheating.
• ON-OFF led light (9): indicates the tool is working.
• Poles inversion protection in the connection with the battery: is built in the electronic control card.
• Max engine absorption: 20 A
• Min. and max. lead battery voltage: 9V – 14V
• Min. and max. lithium battery voltage: 11.5V – 16.9V
20 - 68
Contains the gearbox, the electronic card and the switches
Allow to lock the extension pole
Locks the extension pole
Connects the power unit with the power supply cable
Shows the identifi cation details
Connect the power supply cable with the battery poles
Starts and stops the tool
Allows to choose the engine rotation speed
Shows if the tool is on or off
Transmits motion from the power unit to the harvesting head
Holds the tool
Holds the tool
Connects the power unit with the power supply cable
Connects the power unit with the lead battery
Connects the power unit with the lithium battery
FUNCTION PICT. NO.
A
A-C
A-C
A-C
B
E
B
B
B
C
C-D
C-D
C-E
C-E
C