HB Products HBLC Manual page 14

Use the HB tool for setting up the sensor
Advanced versions only
Setup — level or control
The sensor can operate in two different modes
• As sensor input to a PLC, computer or other device that
Setting up the sensor
The HB tool has three pages of settings. Some fields will
be shown in grey when they are not relevant/active
with the setting chosen. Detailed explanations of the
individual fields will show up when the mouse is
moved over the field. Only the latest version of the
tool has this feature.
When you like to change a setting ,you
just type in a new value or select in the
drop down. After changing the value
you store the data by clicking "save to
sensor". The data is then saved and
stored in the sensor and remains there
even when the power supply is discon-
nected.
Rigid level sensor manual 01 May 2020 HBproducts.dk 14