Cleaning The Cot; Waxing The Cot (Optional); Inspecting The Cot - Ferno PROFlexX User Manual

PROFlexX Series
®

9.5 Cleaning the Cot

1. Remove the restraints, mattress and any
accessories.
2. Hand clean all surfaces of the cot with warm water
and a mild detergent.
3. Use a brush with stiff bristles to remove stains.
Do not use a metal wire brush.
4. Rinse with warm, clear water. Dry the cot with a
towel or allow it to air-dry.

9.6 Waxing the Cot (Optional)

While it is not necessary to wax this cot, waxing the
aluminum main frame or the painted legs will not damage
them, and will help maintain the cot's appearance.
Disinfect and clean the cot before applying wax. Use
an automotive wax as directed by the wax manufacturer.

9.7 Inspecting the Cot

Have your service's equipment maintenance personnel
inspect the cot regularly. Follow the checklist at right
and operate the cot through all its functions as described
in this manual.
If inspection shows damage or excessive wear, remove
the cot from service until repair is made.
© Ferno-Washington, Inc. 234-3346-00 March 2006
Important
Water under high pressure, or steam,
penetrates joints, flushes away lubricant, and
causes corrosion. Use caution when cleaning
moving parts such as joints and hinges.
Important
Using abrasive cleaning compounds or
applicators on the cot can cause damage. Do
not use abrasive materials to clean the cot.
INSPECTION CHECKLIST
Are all components present?
Is the cot free of excessive wear?
Are all screws, nuts, bolts, rivets, and roll pins
securely in place?
Do all moving parts operate smoothly and
properly?
Does the cot lock properly into each position?
Does the cot load and unload properly?
PROFlexX only: Does the safety hook
engage the safety bar?
Does the cot roll smoothly?
Do the wheels have some tread?
Are the restraints properly installed?
Is restraint webbing in good condition with
no cuts or frayed edges?
Are restraint buckles free of visible damage
and do they operate properly?
Do installed accessories operate properly
without interfering with cot operation?
Is the ambulance properly prepared for the cot?
Approved cot fastener and safety hook installed?
Maintenance
33