Site Requirements And Product Specifications; Physical Specifications - 3Com 4005 Installation And Maintenance Manual

3

Physical Specifications

S R
ITE EQUIREMENTS AND
S
PECIFICATIONS
This chapter describes the site requirements and product specifications for your
Switch 4005. The major sections are titled as follows:
Physical Specifications
I
Environmental Specifications
I
Ventilation Requirements
I
Location Requirements
I
Power Requirements
I
Safety Information
I
Regulatory Compliance
I
The physical specifications for the Switch 4005 chassis are shown in Table 1.
Table 1 Chassis Physical Specifications
22.23 cm
Height
48.3 cm
Width
43.94 cm
43.68 cm
Depth
12.42 kg
Weight
20.62 kg
Tabletop, shelf, or standard 19-inch rack
Mounting
10/100BASE-TX, 100BASE-FX, 1000BASE-SX, 1000BASE-T, GBIC
Network
Interfaces
Any Ethernet port on the interface modules
Management
Access Ports
RS-232 (DB-9) serial port on the Switch Fabric Management Module
8.75 inches (5 Rack Units)
19 inches (including rack-mount flanges)
17.3 inches (not including rack-mount flanges)
17.2 inches
27.38 pounds (chassis, backplane, power supply, fans)
45.46 pounds (fully loaded)
P
RODUCT