Condensate Drain Connections - Komfovent DOMEKT Series Installation And Service Manual

The diameter of the ducts varies by unit model:
Duct A 125
Duct B 125
Duct C 125
Duct D 125
Duct E 125

4.2. Condensate Drain Connections

All condensate drain connections must be correctly trapped. Incorrect trapping can result in flood-
ing within the unit and consequent flooding of the immediate area. Fill the drain trap with water before
starting up the unit.
All drain lines should be insulated where passing through any space where damage from condensa-
tion drip might occur. If the unit is installed in unheated premises the condensate pipe should be heat-
insulated and heated with heating cable.
Drain scheme of Vertical Unit
view 1
10a Picture
The bend of the water trap can be repositioned by turning it to the right or the left. The drain line
from the water trap must be arranged so that it will not damage adjacent unit sections or building ele-
ments. If the drain line is run through cold spaces, it should be insulated to prevent freezing. A heating
cable may be required.
UAB KOMFOVENT we reserve the right to make changes without prior notice
D_21-03
160 160 200
160 160 200
160 160 200
160 160 200
100 125 125
A condensate pipe and a drain trap
D = 15
Unit
250 160 200
250 160 200
250 160 200
250 160 200
125 - -
Drain scheme of Horizontal Unit
view 2
250 160 200
250 160 200
250 - -
250 - -
- - -
10b Picture
250
250
-
-
-
17