Table of Contents
Advertisement
Initial status
In the initial status the sensors are not actuated and are in the initial status condition.
Graphic
Operating status display
The operating status display gives the current status of monitored units.
Graphic
Warning
In the event of a warning the system continues to run normally and a warning message is
issued via the software. The warning is issued visually in the software and can be acknowl-
edged via the control panel once the trigger for the warning has been rectified.
Graphic
Alarm
There are errors that trigger an alarm without changing to emergency stop mode. For
example, if an igniter does not start, the triggered alarm must be acknowledged via the
control elements on the cabinet or touchscreen after the incorrect start. The next ignition
attempt can then be started.
There are alarms that result in emergency stop mode. Every error that resulted in the
triggering of an alarm must be rectified.
Graphic
Edition 03 / 69 06 898
FTS 8000
Description
Gray background and gray icon or red/yellow
emergency stop switch icon:
Sensor not activated
Description
Gray background and green icon:
Sensor activated
Description
Flashing yellow background and yellow icon:
New warning present
Flashing yellow background and yellow icon:
Acknowledged warning present
Yellow background and gray icon:
Trigger for the warning is no longer present
Description
Flashing red background and red icon or gray/yellow
emergency stop switch icon:
New alarm present
Lit red background and red icon:
Acknowledged alarm present
Red background and gray icon or red/yellow
emergency stop switch icon:
Trigger for the alarm is no longer present
Operation
48
Advertisement
Table of Contents
