Lighting And Stoking - RAIS Q-Tee II INSERT USA Series User Manual

Lighting and Stoking

To light the stove, use alcohol briquettes or simi-
lar, as well as approx. 2 kg of firewood, split into
kindling sticks. Set the air damper to the fully open
position.
Be careful not to place the firewood too close to
the opening and glass.
TIPS before firing up:
Open a door or window close to the wood burning
stove.
If there is wind in the stove coming from the chim-
ney, it is advisable to place a curled-up piece of
newspaper between the upper baffle plate and the
chimney, set the paper on fire, and wait until you
hear a "rumbling" noise in the chimney. This means
that there definitely is a draught in the chimney and
you avoid smoke in the room.
Light the fire and shut
the door, leaving an open
gap of approx. 10-15
mm.
23