RAIS Q-Tee II INSERT USA Series User Manual page 13

2. Connect the flue collar to the chimney or liner. place the insert in the fireplace.
3. The insert can then be placed and centered in the fireplace or built-in
opening. To level the insert, use the 4 leveling screws situated under the
firebox. Important! At least ½" (1cm) space should be left between insert
and the opening.
4. Now the stovepipe (flexible or solid) can be attached to the insert. Reach up
through the insert and pull the flue collar into the opening and scure it to the
insert.
5. Finally, remount the baffle plates and chicane in reverse
order.
Insure that there is a secure and airtight connection between
the liner and the chimney.
These holes in the inserts convection box
can be used to fix the insert in place. Open
the door to acces the holes.
A
A
13