Kenwood XD-751 Instruction Manual page 58

58
0
Select the program number to be used and press the ENTER key.
!
Set the POWER switch to OFF (STANDBY) position.
When timer operation is not required
1 Press the TIMER key.
2 Select "PROG. ON/OFF" and press
the SET key.
3 Select "PROG. OFF" and press the
ENTER key.
To set the same timer program again
1 Press the TIMER key.
2 Select "PROG. ON/OFF" and press
the SET key.
3 Select the program to be set and
press the ENTER key.
MULTI
CONTROL
ENTER
ON/STANDBY
MULTI
CONTROL
SET
MULTI
CONTROL
ENTER
MULTI
CONTROL
SET
MULTI
CONTROL
ENTER
Adjust the clock before setting the timer.
PROG.1 .......... Program 1 operates.
PROG.2 .......... Program 2 operates.
PROG.1 / 2 .... Programs 1 and 2 operate.
PROG. OFF .... Timer off.
÷ The selected contents of the timer programming will be displayed in
sequence.
(ON TIME = OFF TIME = Mode = Input source = Preset channel)
The reservation contents cannot be cleared. The contents are
cleared only when they are changed.
Note
Note
SLEEP
TIME SET
O.T.T.
PROG. ON/OFF
PROG. 1
PROG. 2
AUTO POWER SAVE
PROG.1 .......... Program 1 operates.
PROG.2 .......... Program 2 operates.
PROG.1 / 2 .... Programs 1 and 2 operate.
PROG. OFF .... No program operates.
÷ The reservation contents are held in memory.
SLEEP
TIME SET
O.T.T.
PROG. ON/OFF
PROG. 1
PROG. 2
AUTO POWER SAVE
PROG.1 .......... Program 1 operates.
PROG.2 .......... Program 2 operates.
PROG.1 / 2 .... Programs 1 and 2 operate.
PROG. OFF .... No program operates.
÷ Also prepare the disc or tape and adjust the listening volume.
Timer operation
XD-SERIES (En)
| Scrolled display (PROG. ON/OFF)
P R O G O N / O
| Scrolled display (PROG. ON/OFF)
P R O G O N / O