Kenwood XD-751 Instruction Manual page 21

Muting the sound temporarily
MUTE
C
Remote control unit
÷ Press again to resume the original volume.
÷ The sound muting is also canceled when the volume is controlled.
Bass compensation
(EX.BASS)
÷ Each press switches EX.BASS on and off alternately.
÷ The EX.BASS is switched off automatically during recording.
STANDBY mode of ON/STANDBY (
When the display shows the time or "- - : - -", a small amount of
current is supplied to the unit to back up the internal memory.
This status is referred to as the STANDBY mode, and the unit in
the STANDBY mode can be turned ON from the remote control
unit.
When CD has been selected.
C D 0
1 2
Volume display
V O
1 2
(Remote control unit only)
Blinks
D 0 1 1 2 3
) switch
1 0 0 0
3
L 5 7
3
Sub woofer level adjustment
(Except for the XD-5...series)
Adjust the sub woofer level according to the category of music and
your liking.
1 Press the MODE/DEMO key.
2 Select "S.W." and press the SET key.
SRS LEVEL
MULTI
CONTROL
(Only when SRS 3D is ON)
S.W.
L/R BALANCE
SET
Go to step 3 within 15 sec.
3 Select the desired level and press the ENTER key.
OFF
MULTI
CONTROL
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
LEVEL 5
ENTER
AUTO POWER SAVE function
When the power is ON and neither recording nor playback is
executed for 30 minutes or more, the power is switched off au-
tomatically by this function. This function can be made active
or not active by the following operation.
1 Press the TIMER key.
2 Select "AUTO POWER SAVE" and press the SET key.
MULTI
CONTROL
SET
3 Select "ON" or "OFF" and press the ENTER key.
MULTI
CONTROL
ON ..... Auto power save is used.
OFF .... Auto power save is not
ENTER
RETURN
÷ This function is not available when the AUX input is selected. When
the TUNER input is selected, it is available only when the volume is
set to 0.
Let's put out some sound
XD-SERIES (En)
s W
s U B L E V E L
SLEEP
TIME SET
O.T.T.
PROG. ON/OFF
PROG. 1
PROG. 2
AUTO POWER SAVE
A U T O T P O W E R
| Scrolled display
(AUTO POWER SAVE)
used.
21